Short answer: returns are an information problem, not a logistics problem. Information is cheap before it enters the network and expensive after - it turns into freight and storage. Intercept at checkout, before label generation, and before dispatch, address the two distinct causes, and close the loop with structured return reasons.
| Cost | Note |
|---|---|
| Outbound freight | Sunk |
| Return freight | Often higher than outbound |
| Handling and storage | Second operation on the destination side |
| Loss on goods | Markdown, scrap or destruction |
| Reshipment | Pick, pack, ship again |
| Lost customer | The largest item, and it never appears in a cost report |
Measuring returns in freight terms is why most teams under-invest in prevention.
| Cause | Typical symptoms | Interception |
|---|---|---|
| Address | Missing house number, postcode inconsistent with street, city mismatch, residential/commercial misclassification leading to failed delivery, recipient name or postcode typed into the street field | Address validation and standardisation |
| Compliance | Wrong HS code so required documents were never prepared, restricted or prohibited items, incomplete paperwork, unpaid duties | HS code plus regulatory conditions, checked early |
The difference is where they surface - delivery versus clearance - but both are visible before dispatch.
Stage 1 - at checkout: real-time address validation and standardisation. Prompt, do not block: the correction belongs to the customer, not to your support team.
Stage 2 - before label generation: batch validation; check postcode to city to street consistency; check house-number completeness and residential vs commercial status, which affects delivery success and timing.
Stage 3 - before dispatch: confirm the HS code is right; confirm regulatory conditions are satisfied (licences, certification, labelling, inspection); confirm destination restrictions; confirm duty treatment is priced in.
Checkout -> pre-label -> pre-dispatch compliance -> handover
^ ^ ^
cheapest next cheapest catches the most expensive failures
This is also the only way to demonstrate to the business that prevention spend is worth it.
One ratio decides it:
cost per interception vs cost per return
They address two different sources of returns and are complementary, not substitutes. Markets and data version: Data version & sources (/en/help#data-version).
Disclaimer: This guide covers method and mechanics for return-rate reduction, not a service commitment. Cause mix varies widely by channel, category and destination; build your own numbers before setting rules.